If your water pressure has been dropping and your shower feels like a drizzle, the culprit is likely decades of mineral buildup inside your old galvanized pipes — and we can fix that without tearing out your walls. Repiping is the permanent answer when patching one leak after another stops making sense.
Flushing has a lot of older housing, and pipe material tracks with a home's age. Houses built before 1960 typically ran galvanized steel supply lines, which corrode and choke closed from the inside over decades. That's the source of the rust-colored water, the failing pressure, and the string of pinhole leaks so many of these homes eventually get.
Homes from the 1960s and 70s often have copper that's now developing pinhole leaks at the joints, sometimes with galvanized remnants still in the mix. Either way, once a house starts leaking in multiple spots, replacing the pipe is smarter money than chasing each failure.
We repipe with modern PEX or copper for better flow and clean water, and we replace old galvanized or lead service lines — a real concern for lead awareness across Genesee County. Not sure if you need it? We'll help you weigh repiping against another repair.
Signs your home needs repiping
Rusty or discolored water
Brown or yellow-tinged water, especially first thing in the morning, means your galvanized pipes are corroding from the inside. The rust you see is the pipe wall breaking down.
Water pressure that keeps fading
As mineral scale and corrosion narrow old galvanized pipe, less water gets through. A shower that's turned into a drizzle over the years is a classic sign the pipe is closing up.
Repeat leaks in different spots
One pinhole leak is a repair. Several across the house within a year or two means the pipe itself is failing, and patching each new leak becomes throwing money at a losing cause.
You have a lead or galvanized service line
Older service lines can be lead or galvanized, which many homeowners want gone for water-quality peace of mind. Replacing the line with copper or PEX resolves it at the source.
Frequent, unexplained water issues
Fluctuating temperature when someone runs a tap, metallic-tasting water, or visible corrosion on exposed pipe all point to a supply system that's near the end of its service life.
What's Included
- Whole-home repiping in PEX or copper
- Replacement of aging galvanized steel and old service lines
- Lead service-line assessment and replacement guidance
- Section repipes for problem runs (not always the whole house)
- Water-pressure restoration and rust-colored-water fixes
- Drywall-minimal routing and a clean, tested finish
How a whole-home repipe works
- 1
We inspect and map your system
We identify your pipe materials, find the trouble spots, and map the runs. Knowing whether you're dealing with galvanized, aging copper, or a lead service line shapes the whole plan.
- 2
We give you a clear scope and price
We lay out exactly what's being replaced, the material we recommend, how long it takes, and a flat price in writing. You know the full picture before we open a wall.
- 3
We pull permits and plan access
Repiping is permitted work, and we handle it. We plan the least-invasive routes, opening only the small access points we need rather than gutting finished rooms.
- 4
We run new PEX or copper
We install modern pipe rated to outlast the old material, replacing supply lines and the service line as needed, with new shut-offs and connections done to code.
- 5
We test, patch, and guarantee it
We pressure-test the new system, flush the lines, close up the access points, and pass inspection. The work is backed by our guarantee and modern pipe warranties.
What Affects the Cost
Repiping is a bigger investment than a single repair, and the price depends heavily on your home's size, layout, and pipe. We scope it in person and quote a flat number in writing — here's what drives it.
- The size of the home and the number of fixtures and bathrooms
- Whether it's a partial repipe or the whole house
- Pipe material chosen — PEX or copper
- Whether the buried service line is being replaced as well
- How accessible the runs are behind finished walls and floors
- Permit and inspection requirements for the work
- Drywall access and patching after the new pipe is in
We always give you a written, upfront price before any work begins — no surprises. Call (207) 419-2600 for a free estimate.
Why Flushing Homeowners Choose Us for Whole-Home Repiping
Built for pre-1975 Flushing homes
Corroded galvanized supply is everywhere in the older neighborhoods — repiping ends the rust, low pressure, and repeat leaks for good.
Repair when we can, repipe when you should
We'll tell you honestly whether a targeted section fixes it or the whole system is due.
Pressure you'll actually feel
New PEX or copper restores the flow decades of mineral buildup stole from your showers and faucets.
Where We Provide Whole-Home Repiping
We handle whole-home repiping for homes and businesses across Flushing and all of Genesee County — including Flint, Flushing Township, Swartz Creek, Montrose, Mount Morris, Clio, Burton, Grand Blanc. Don't see your town? See every area we serve or just call — we very likely cover you.
Frequently Asked Questions
How do I know if my galvanized pipes need replacing?
Rusty water, steadily dropping pressure, and repeated leaks are the big three. If your home predates 1960 and shows those signs, the galvanized supply lines are corroding shut and repiping is the fix.
PEX or copper — which is better?
Both outlast galvanized by decades. PEX is flexible, resists scale and freezing, and installs with less wall opening; copper is rigid and long proven. We'll recommend based on your home and budget.
Will you have to tear my walls apart?
No. We plan the routes to open as few, as small access points as possible, and PEX especially threads through existing cavities. We patch the openings and keep the disruption to a minimum.
Should I replace my lead or galvanized service line?
For water-quality peace of mind, yes. Replacing an old lead or galvanized service line with copper or PEX removes the concern at the source. We can check what you have and handle the swap.
How do I know if my house needs repiping?
Rust-tinted water, chronically low pressure, pinhole leaks, and visibly corroded galvanized pipe are the big signs — especially in Flushing homes built before the mid-1970s. We inspect your lines and tell you whether a section repair or a full repipe makes sense.
PEX or copper — which is better?
Both are excellent upgrades over galvanized. PEX is flexible, freeze-tolerant, and cost-effective; copper is rigid, long-proven, and preferred in some situations. We'll walk through the trade-offs for your home and budget rather than pushing one.
